Table of Contents
Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.
The product demonstration pertains to the LUXX-Series Tail lights for a 4Runner. It’s worth noting that this guideline may be applicable to other LUXX-Series Tail lights that come equipped with a cooling fan.
OPEN THE HOUSING SEAL CAP (DUST COVER)
Remove the dust cover from the rear of the LUXX-Series Tail lights.
LOCATE THE COOLING FAN CONNECTOR
Find the cooling fan connector in the wiring.
UNPLUG & DISCONNECT THE FAN CONNECTOR
Unplug and disconnect the fan connector from the wiring.
SECURE THE SEAL CAP
Ensure to securely fasten the housing seal cap (dust cover), and you’re finished!
Repeat the same steps for the other side of the tail light.
End of installation guide
If you have any questions about installation, please reach out to our technical support team for assistance.