Table of Contents
Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.
This guide provides a detailed, step-by-step process for converting your DRL from white to amber.
DO NOT USE DIELECTRIC GREASE / REMOVE ANY DEBRIS OR ANY PRE-EXISTING GREASE OR WEATHER SEALANT
How to Switch DRL from white to amber on 92-96 Ford F-Series/Bronco
The first thing you want to do is to flip your light on its back and locate the Resistor

Once found you will need to remove the two phillips head screws

Once removed, you’ll have access to the grommet below. Pull it back to reach the internal components of the light


Once opened, locate the two single blue wires with black plugs at the ends. Connect them together to switch the DRL to amber.


Once connected, the process is complete—just reassemble everything back to its original position


End of installation guide
If you have any questions about installation, please reach out to our technical support team for assistance.