Table of Contents
Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.
INSTALLATION TOOLS
Phillips Screwdriver
How to Switch to Amber Daytime Running LIght (DRL) for AlphaRex 22+ Honda Civic FL5 Headlights
To switch the DRL to amber, follow these instructions. Remember to do this before you install the headlight.
Begin by placing the headlight face-down on the lens to access the control board located on the underside.
Locate the control board and remove the four screws securing it to access the internal components. Be sure to keep the screws in a safe place and handle the board carefully to avoid any damage. 
After removing the screws, gently lift the control board to reveal the internal wiring.Locate the two black plugs, each with a single wire, and connect them together to activate the amber DRL. 
Once the plugs are connected, the process of switching from white to amber DRL is complete. Simply reposition the control board and securely reinstall all four screw. 
End of installation guide
If you have any questions about installation, please reach out to our technical support team for assistance.