Ford F150 (2015-2017), Ford F150 (2018-2020), Ford F150 Raptor (2017-2020), Headlights Installation Guide, How to

How to Switch to Amber Daytime Running Light (DRL) for AlphaRex 15-20 Ford F150 / 17-20 F150 Raptor Headlights

Table of Contents

Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.

In order to switch for Amber (Yellow color) DRL & Parking lights, you would need to purchase the optional circuit board according the model and the year of your vehicle. (for the NOVA-Series headlights for 2015-20 Ford F150 and 2017-20 Ford Raptor) By default the DRL & Parking lights color are White from factory.

CUSTOMERS CAN UPGRADE & CHOOSE TO PURCHASE THE CIRCUIT BOARD BASED ON THEIR PREFERENCE. PLEASE NOTE: once you install the circuit board and PLUGGED & switched into Amber, the DRL & Parking lights color will remain (Yellow color) at all times.

HOW TO REMOVE & SWAP THE CIRCUIT BOARD

From back of each ALPHAREX headlights, at the bottom you will find the factory circuit board under a mounting bracket. Please unscrew to remove bracket and remove the circuit board.

With a Phillip screwdriver unscrew the (3) screws from the mounting bracket.

Once the mounting bracket is removed, you will have access to circuit board. Please unscrew the (4) screws to open.

Unplug the wires to remove the factory circuit board and lets get ready for swap the optional circuit board.

Plug the wires to the new circuit board for the swap.

CONNECT THE AMBER SWITCH PLUGS

From the new circuit board you will find the amber DRL plugs. Connect plugs directly for each of the headlights.

Reverse the removal steps and reinstall the mounting bracket to complete the circuit board swap.

COMPLETE SWITCHING INTO AMBER DRL & PARKING LIGHTS

After plug-in the connections, please install the headlights to the vehicle.

Congratulations! You have switched into Amber (Yellow color) DRL & Parking lights.

End of installation guide

If you have any questions about installation, please reach out to our technical support team for assistance.

Start typing to see products you are looking for.