Table of Contents
Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.
Trim the inner plug
Due to internal modifications in newer Tesla models, it’s essential to trim the plugs of ALPHAREX’s 2023 Tesla Model 3 Trunk Lid Liftgate Tail lights for proper fitting. Follow the instructions below for a seamless pre-installation process.
Ensure precise trimming of the plug as illustrated in the provided picture 
Now that the plug has been trimmed, it can be effortlessly inserted into the outer trunk liftgate’s plug hole inlet. Kindly repeat the same steps for the plug on the other side of the tail light. Thank you! 
End of installation guide
If you have any questions about installation, please reach out to our technical support team for assistance.