ALPHAREX specializes in designing and producing superior and uniquely stylish aftermarket automotive performance lighting with unrivalled innovative technology. This installation guide takes you through the step-by-step process of installing your new ALPHAREX TAIL LIGHTS for your 13-16 SCION FR-S / 17-20 TOYOTA 86 / 13-20 SUBARU BRZ.

Do NOT use dielectric or any type of weather sealing grease on connectors or sockets.
Doing so will result in connection problems and will not be covered under warranty. Please click HERE for further explanation.

Table of Contents

Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.

INSTALLATION TOOLS

Plastic Panel Popper
1/4 Ratchet
Socket
Size NEEDED
No data was found

Before we get started

This installation guide provides a detailed, step-by-step process for installing your new AlphaRex tail lights on a 13-16 Scion FR-S / 17-20 Toyota 86 / 13-20 Subaru BRZ.
DO NOT USE DIELECTRIC GREASE / REMOVE ANY DEBRIS OR ANY PRE-EXISTING GREASE OR WEATHER SEALANT
** Always ensure your vehicle is parked and the ignition is turned off before working on it.

PART I - Remove Tail Lights

PART II - Install Tail Lights

End of installation guide

If you have any questions about installation, please reach out to our technical support team for assistance.