NOTE: Some vehicle require the DRL harness installed for the headlight to function properly.
Do NOT use dielectric or any type of weather sealing grease on connectors or sockets.
Doing so will result in connection problems and will not be covered under warranty. Please click HERE for further explanation.
Table of Contents
Disclaimer: This installation article is a tutorial guide. By reading this article, you agree it is for reference only and AlphaRex USA and its distributors make no guarantee on the finished results. Under no circumstances whatsoever shall AlphaRex USA nor its distributors be liable for any damage, misuse or personal injuries. If you do not fully understand the installation procedure, it is highly recommended that you seek help from professional mechanics to do the installation.
INSTALLATION TOOLS
1/4 Ratchet
Metal Panel Popper
Phillips Screwdriver
Flat Screwdriver
1/4 Extension
Socket
Size NEEDED
PART I - Remove Headlights
PART II - Install Headlights
End of installation guide
If you have any questions about installation, please reach out to our technical support team for assistance.